Toggle Nav
  • Categories
  • My Account
Search
Advanced Search
  • Compare Products
Menu
Account

Heat Shrink End Cap size 6.4mm down to 1.50mm Diameter (6.4/ADH) Black

In stock
SKU : HENC-6.4/ADH-0-PC
Not Set
£0.99 £1.19

Available in various pack sizes.
See below for bulk options

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back
Add Personalisation

  • Text
  • Number
  • Text & Number

Text Element

Save Back

Text & Number Element

Save Back

Number Element

Save Back
Skip Personalisation | Request a Callback

  • Buy 5 for £0.75 £0.90 per and save 24%
  • Buy 10 for £0.65 £0.78 per and save 34%
  • Buy 25 for £0.59 £0.71 per and save 40%
  • Buy 50 for £0.55 £0.66 per and save 44%
  • Buy 100 for £0.49 £0.59 per and save 51%
  • Buy 250 for £0.45 £0.54 per and save 55%
  • Buy 500 for £0.39 £0.47 per and save 61%
  • Buy 1000 for £0.35 £0.42 per and save 65%
  • Buy 2500 for £0.29 £0.35 per and save 71%
  • Buy 5000 for £0.25 £0.30 per and save 75%
main product photo

Size 6.4mm Diameter shrinking down to 1.50mm Diameter. Adhesive lined heatshrink end caps. Used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. End caps are used for protecting the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.

Details

Heat Shrink End Cap size 6.4mm down to 1.50mm Diameter (6.4/ADH) Black

  • Adhesive-Lined Caps
  • Each Cap Covers a Wide Range of Cable Sizes
  • Seal & Protect Cables from Moisture, Dirt & Corrosion

Adhesive lined heat shrinkable polyolefin cable caps used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. Cable caps are internally coated with a hot-melt adhesive making them water resistant.

End caps are used to protect the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.

Whilst we can provide various gas torches, these Heat Shrink End Caps can also be applied with our wider range of safer, more easily controlled and compact modern electronic heat guns.

They can be used on cables at up to 0.05 MPa internal pressure between -30°C and 70°C.

Each cable cap covers a wide range of cable sizes as shown in our data sheet.

Features and Benefits:

  • Rugged installation
  • Resistant to common fluids & chemicals
  • Cable caps are internally coated with a hot-melt adhesive
More Information
More Information
Quick Search Code 100042
Applications

  • Seals & protects cable ends from the environmental effects

Specification
PROPERTIES VALUE STANDARD
Physical
Tensile Strength 12 N/mm' (Mpa) (min.) ASTM D638
Ultimate Elongation 350 % (min) ASTM D638
Density 1.05± 0.2 gm/cm' ASTM D792
Hardness 45 ±10 Shore D ASTM D2240
Water absorption 0.2 % (max.) ASTM D570
Thermal
Accelerated ageing (120°C for 500 hrs) ASTM D2671
Tensile Strength 11 N/mm' (Mpa) (min.) ASTM D638
Ultimate Elongation 300 % (min.) ASTM D638
Low Temperature Flexibility
(-40°C for 4 hrs.)		 No Cracking ASTM D2671
Heat Shock (250°C for 30 min.) No cracking or flowing ESI 09-11
Shrink Temperature 125°c IEC 216
Continuous Temperature Limit -40 to + 100°c IEC 216
Electrical
Dielectric Strength 12 KV/mm.(min) ASTM D149
Volume Resistivity 1 x 1014 Ohm.cm (min) ASTM D257
Dielectric constant 5 (max.) ASTM D150
Downloads
File Icon End_Caps_Information_sheet_1_ (156.92 kB)
File Icon Spec Sheet (299.51 kB)
Customers also bought
Check items to add to the cart or
We found other products you might like