BFC - Black Fire Cement 1250°C

BFC - Black Fire Cement 1250°C

• Excellent adhesion 

• Easy to use

• Patching and repairing 

Black Fire Cement is a smooth paste which sets rock hard when exposed to the air. Fire Cement has excellent adhesion to fire bricks, blockwork, stone, clayware and most metals. Primarily useful for minor repair work, cracks less than 5mm and seals to form smoke and gas tight joints.

How to use: 

1. Make sure the area is clean and that all dirt, dust, rust and grease is removed.

2. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size.

3. Dampen the surface where the material is to be applied.

4. Apply using a cartridge gun.

5. The material will set at room temperatures but the time will be reduced by lighting the fire or applying heat, gradually increasing over a four hour period.

6. After curing any fine cracks that may appear in the cement it should be filled with the same material to ensure an air tight seal.